Products - Lead Nuts - Plain Style

Plain Style Lead Nuts

Plain style lead nuts in multiple sizes to accommodate leadscrew sizes up to 3/4 inches in diameter. The low friction polymer leadnuts are made from an acetal and teflon matrix called Turcite X™.

Notes for Plain Style Leadnuts

Our drive nuts are designed for use with our precision rolled leadscrews

  • Due to the material composition of Turcite X™, leadnuts can expand and contract when exposed to temperature variations.
  • Loads and Torque ratings assume axial loads
  • Dynamic loads should not exceed 20% of static load ratings
  • Always allow extra torque to handle additional system friction
  • Always use proper lubrication if required
  • Compatible with optional mounting flanges

Specifications
Leadscrew Size (nominal OD)
Shaft Diameter (OD)
Total Length (L)
Mount Thread (UN)
Flange Width (W)
3/16" to 3/8"
.750
.750
5/8-18
.250
7/16"
.790
1.000
5/8-18
.250
1/2" to 5/8"
1.000
1.000
15/16-18
.375
Leadscrews
Leadnuts
Anti-Backlash
Plain Style
Mounts

Search